6" Stage I Lift Kit
Ford’s new truck will offer one of the most significant innovations in the industry’s history and Pro Comp is right there with them. The one-piece drop down crossmembers and high-strength, extended steering knuckles install easily and maintain ideal steering geometry and factory CV axle angles.They are compatible with the factory stability control system and can fit 35-inch tires.
Features
Extended steering knuckle
High clearance one-piece crossmembers
Integrated front differential skid plate
Retains factory ball joints
Rear blocks with bump stop pad
Compatible with roll stability control
Notes
Use 52480 carrier bearing drop kit for Crew Cab Standard box or long box w/ 2 pc rear driveshaft if driveline vibration occurs.
Rear axle shim kit 52700 cab be used to increase rear height up to 1".
Vehicle will require alignment after kit is installed
Will not fit Raptor models.
This kit requires 18" or larger rims w/ no more than 5.5" backspacing. 18" Reverse mount rims cannot be used. Factory rims cannot be used. Modification or cutting of the front inner fender beams & removal of factory mud guards may be required depending on rim width, offset & tire selection. Its up to the installer to verify fitment & clearance for safe operation of the vehicle.
Parts Included
Steering Knuckles
Drop Crossmembers
Differential Drop Brackets
Sway Bar Drops
Rear 4" Blocks
Rear U-Bolts
Front Strut Spacers
Rear Shock Absorbers
All Necessary Hardware
Detailed Installation Instructions
Optional Parts
Front Coil-Over Conversion Kit (52213BMX-4)
Front Uniball Upper Control Arms (52001B)
Rear Add-A-Leaf Kit (13137)
Rear Axle Shim Kit 1" (52700)
Rear Traction Bars (72500B)
Rear Traction Bar Mount Kit - Standard / Crew Cab (72096B)
Rear 1.5" Block Kit w/ U-Bolts (62201)