AERO Series Premium Front Bumper
Fab Fours' newest Ultra Light Hybrid bumpers: AERO SERIES. By combining tube and plate steel these premium bumpers are constructed to be lightweight, offer a sleek AEROdynamic design while providing optimal tire clearance. Engineered to retain factory skid plate and new technology features including Adaptive Cruise Control and Park Assist. Relocation bracket is required for adaptive cruise control (M3850-1). Chrome grilles will not work with relocation bracket. Center Cutout for Rigid Industries 20” LED light bar. The fit of this bumper is high and tight and perfectly follows the vehicles body lines.
LED lights sold separately! Buy this bumper with the Lights and save $$$, contact us for custom options. If you are able to find this bumper at a lower price please do not hesitate to contact us and let us try to beat that price. If you have any questions concerning availability or vehicle fitment we will be happy to take the time to answer all of your questions & make sure this is the correct bumper for your vehicle
The rear bumpers on today’s pickups are thin and almost more of a cosmetic accessory than a heavy-duty protective part of the truck. - See more at: http://www.propickupmag.com/hd-rear-bumper-install#sthash.GhO3DjCr.dpuf
The rear bumpers on today’s pickups are thin and almost more of a cosmetic accessory than a heavy-duty protective part of the truck.
Manufacturers are installing their own trailer hitches, which is another reason they feel the need for any real strength in the bumper is outweighed by saving weight for fuel economy.
But for those who work in and around the construction world, a heavy-duty rear bumper can save the day.
That’s why we looked to Fab Fours when it came time to swap out the stock bumper on our Mobil Delvac Surveyor 1 with one stout enough to handle the occasional “oops!” around a jobsite or off-pavement.
Fab Four’s Black Steel Elite (DR10-U2050-1) style rear replacement bumper nicely integrates Ram’s factory receiver hitch and rear back-up sensors.
This bumper, which weighs about twice that of the OEM bumper, bolts right up to the OE frame mounts for an easy swap.
- See more at: http://www.propickupmag.com/hd-rear-bumper-install#sthash.GhO3DjCr.dpuf
The rear bumpers on today’s pickups are thin and almost more of a cosmetic accessory than a heavy-duty protective part of the truck.
Manufacturers are installing their own trailer hitches, which is another reason they feel the need for any real strength in the bumper is outweighed by saving weight for fuel economy.
But for those who work in and around the construction world, a heavy-duty rear bumper can save the day.
That’s why we looked to Fab Fours when it came time to swap out the stock bumper on our Mobil Delvac Surveyor 1 with one stout enough to handle the occasional “oops!” around a jobsite or off-pavement.
Fab Four’s Black Steel Elite (DR10-U2050-1) style rear replacement bumper nicely integrates Ram’s factory receiver hitch and rear back-up sensors.
This bumper, which weighs about twice that of the OEM bumper, bolts right up to the OE frame mounts for an easy swap.
- See more at: http://www.propickupmag.com/hd-rear-bumper-install#sthash.GhO3DjCr.dpufThe rear bumpers on today’s pickups are thin and almost more of a cosmetic accessory than a heavy-duty protective part of the truck. - See more at: http://www.propickupmag.com/hd-rear-bumper-install#sthash.GhO3DjCr.dpuf
Product Details
Ultra LightWeight
Open design provides greater tire clearance
Retains factory skid plate
Overall design and fit is "High and Tight" to the contours of the vehicle.
Allows for an integrated 20" Rigid Industries LED light bar in the center (light bar not included)
Optional relocation bracket to retain factory technology features; Relocation bracket is required for adaptive cruise control. Chrome grilles will not work with relocation bracket (M3850-1).
Complete bolt-on front bumper w/ provided brackets that tie directly to the frame.
100% MADE IN THE USA by Fab Fours in Fab Fours’ factory
Technical Specifications
Materials: 11 ga. U.S. Steel Construction; 1/.75” diameter and .120 Wall Tubing
Finish: 2 Stage Black Powder Coat
Size/Weight: 45 lbs.
Fab Fours Bumper Accessories
Relocation Bracket M3850-1 - Retain Factory Technology Features
Rigid Industries 20" E2-Series Spector LED Light Bar - The Original LED Light Bar - The Rigid Industries E-Series was the first projected LED light bar. Since its introduction in 2006, the E-Series light bar has set the standard in the industry through continuing advances in technology and superior engineering. This is the light bar of choice for everything from light truck / car applications and vehicle race teams to farming equipment and police / fire rescue vehicles. The E-Series light bar is designed to project light at extreme distances while consuming very little power. It features an extruded aluminum housing and polycarbonate lens that is sealed against the elements to provide years of trouble-free operation. Torture Tested & Approved. Rigid Industries patented Specter optics system features 50% more LED's than the Hybrid optics in the same footprint and is specifically designed to cover more area. By incorporating a reflector with no facets or orange peel, the Specter optics system produces an intense, smooth beam with minimal wasted light. Rigid Industries circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. The durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. Rigid Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them.
Rigid Industries 20" E-Series Hybrid LED Light Bar - Since its introduction in 2006, the E-Series light bar has set the standard in the industry through continuing advances in technology and superior engineering. This flagship is the light bar of choice for everything from truck / car / Jeep applications and vehicle race teams to farming equipment and police / fire rescue vehicles. The E-Series led light bar is designed to forward project light at extreme distances while consuming very little power. Rigid’s patented Hybrid optics system is the most powerful, most efficient LED optics system on the market. Utilizing a combination of lens and reflector, our patented optics capture the maximum amount of light emitted from the LED and projects it exactly where you want it. This light bar features both the Spot and Flood versions of the Hybrid optics system. The Spot version of the Hybrid optics system projects light over great distances in a concentrated beam. It's the most powerful spot-style LED light in the industry. This light is perfect for high speeds or any situation where you need extreme distance. While offering just over half the distance of the Spot version, the Flood provides twice the area coverage. This light incorporates both using Spot optics in the middle and Flood optics in the outer sections to provide the perfect combination of distance and area. Rigid’s circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. The extremely durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. The new boost to the E-Series led lights provides 30% more output than before, new 304 stainless brackets with three position mounting options, Deutsch connector, switch, plug & play wiring harness and mounting hardware. Rigid Industries patented Hybrid optics system is the most powerful, most efficient LED optics system on the market. Utilizing a combination of lens and reflector, the Hybrid optics system captures the maximum amount of light emitted from the LED and projects it exactly where you want it. Rigid Industries circuitry is designed in-house to be more powerful, be more efficient, and generate less heat. The durable aluminum housings feature custom, over-sized heat sinks which keep the temperature down and allow the LED's to run cooler and brighter. All Rigid Industries LED lights receive a high quality powder coat finish, a custom-molded rubber seal, and an unbreakable, scratch resistant lens. Rigid Industries LED lights are engineered to withstand whatever you, the road, or nature can throw at them.
